Agua | Filtración de arena

Imprimir

Tratamiento terciario: filtración de arena

Esta página aún no está disponible en español, pero pronto será traducida. Aquí la versión en inglés:

Purpose

  • Removal of suspended solids
  • Removal of residual concentrations of heavy meatls and organic substances

Principle

A sand filter retains suspended solids in two ways. Particles which are larger than the pores in the sand-bed are retained by filtration, while smaller particles are adsorbed to the sand grains. While the sand bed is increasingly fouled, a filter cake with a smaller pore size is formed and helps to obtain a better separation.

Scheme

Application

There are a lot of examples of water containing too high concentrations of suspended solids. This could be effluent from a wastewater treatment plant, which is discharged into surface water as well as surface water which is taken in as a source of process water. Sand filtration proves to be the simplest technique to remove these suspended solids in an economical way.

Configuration

To prevent clogging, the sand filter has to be cleaned regularly. There are continuously and discontinuously cleaned sand filters. A discontinuous sand filter is stopped at regular intervals and flushed with air and water. This has the disadvantage that the process is interrupted during the regeneration when no second sand filter has been installed.  During continuous sand filtration, sand is constantly removed at the bottom of the sand filter, washed and supplemented at the top of the sand filter.

Example of realization

Three continuous open sand filters to polish the effluent of a biological WWTP

Approach Trevi

After physicochemical wastewater treatment or in case of relatively small flow rates Trevi will opt for discontinuous sand filters. For continuous processes such as a biological wastewater treatment plant or in the case of high flow rates a continuous sand filter is often the preferred option. This filter is preferentially fed by gravitation.